Endorfy Arx 500 ARGB

Accessories included - Arx 500 ARGB case 4 × Stratus 140 PWM ARGB fan Mounting kit User manual
Air Duct - No
Category - Root/Electronics/PC parts/Computer casings
Category_1 - Computer Cases and Cooling
Category_2 - Computer Cases
Chassis type - Midi Tower
Color - Black
Cooling - Front fans installed - 3x 140 mm
Cooling - Number of fans supported - 7
Cooling - Rear fans installed - 1x 140 mm
Cooling - Supported front heatsink fan sizes - 120 mm
Cooling - Supported front heatsink fan sizes - 240 mm
Cooling - Supported front heatsink fan sizes - 280 mm
Cooling - Supported front heatsink fan sizes - 360 mm
Cooling - Supported rear heatsink fan sizes - 120 mm
Cooling - Supported rear heatsink fan sizes - 140 mm
Cooling - Supported top heatsink fan sizes - 120 mm
Cooling - Supported top heatsink fan sizes - 240 mm
Description - Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
Design - Anti-dust filter - Yes
Design - Form factor - ATX
Design - Illumination - ARGB
Design - Maximum CPU cooler height - 17.9 cm
Design - Maximum graphics card length - 35 cm
Design - Maximum PSU length - 30 cm
Design - Number of 2.5"/3.5" bays - 1
Design - Number of 2.5" bays - 6
Design - Number of expansion slots - 7
Design - On/off button - Yes
Design - Product colour - Black
Design - Reset button - Yes
Design - Side window - Yes
Design - Suitable for - Gaming
Design - Supported motherboard form factors - ATX
Design - Supported motherboard form factors - micro ATX
Design - Supported motherboard form factors - Mini-ITX
Design - Tempered glass panel(s) - Yes
Design - Type - PC
dimensionalWeight - 14933
dimension depth - 290 mm
dimension height - 480 mm
Dimensions - 486 × 228 × 429 mm
dimension weight - 8500 g
dimension width - 520 mm
Drive bays 2.5'' extern. - 0
Drive bays 2.5'' intern. - 6
Drive bays 3.5'' extern. - 0
Drive bays 3.5'' intern. - 1
Drive bays 5.25'' extern. - 0
Drive bays 5.25'' intern. - 0
ean - 5903018666303
Eans - 5903018666303
EAN_code - 5903018666303
Fan - 14 cm
Form-factor - ATX
Form-factor - Micro ATX
Form-factor - Mini ITX
Front panel connectors - 1 x headphones
Front panel connectors - 1 x USB Typ C
Front panel connectors - 1x microphone
Front panel connectors - 2 x USB 2.0
guarantee - 36
guarantee_type - normal
Manufacturer - ENDORFY
Manufacturer_code - EY2A011
name - ARX 500 Air ARGB EY2A011
Name - ENDORFY Arx 500 ARGB
Name - ENDORFY ARX 500 ARGB, tower case (black, side panel made of tempered glass)
No. of drive bays - 7
Other features -
Other features - Slim optical drive bay - N
Ports & interfaces - Audio input - Yes
Ports & interfaces - Audio output - Yes
Ports & interfaces - Number of USB Type A ports - 2
Ports & interfaces - USB Type-C ports quantity - 1
Power supply - Failure
Power supply - Power supply included - No
producer - Endorfy
Producer - Endorfy
producerCode - EY2A011
ProducerCode - EY2A011
productName - ENDORFY Arx 500 ARGB enclosure (EY2A011)
productSize - Normal
ShortDescription - Midi Tower | czarna | bez zasilacza | 2 x USB 3.0 1 x USB- C | ARGB | 486×228×429 | ARGB |
Side panel - Tempered Glass
sizeX - 528
sizeY - 481
sizeZ - 294
Storage - Card reader integrated - No
Storage - Supported HDD sizes - 2.5
Storage - Supported HDD sizes - 3.5"
vendpn - EY2A011
warrantyLength - 24
warrantyType - F
Weight - 1
weight - 8620
Weight & dimensions - Depth - 429 mm
Weight & dimensions - Height - 486 mm
Weight & dimensions - Weight - 7.5 kg
Weight & dimensions - Width - 228 mm