ADATA XPG Lancer Blade RGB Black, 32GB, DDR5, 6400MHz, CL32, Kit of 2

Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
ID: 1047107 Product code: AX5U6400C3216G-DTLABRBK
In stock 32 units
Warranty: 3 years
121.12 €
Delivery options
  • Delivery to Smartpost parcel locker 6.99 €: {delivery_2_txt_full}
  • Courier delivery 11.99 €: 02.12.2024
Main product parameters All parameters
  • Capacity: 32 GB
  • Maximum frequency: 6400 MHz
  • Type: DDR5
  • CL: CL 32
  • KIT: Kit of 2 modules
Description

This 32 GB Adata DDR5 RAM runs at 6400 MHz maximum clock frequency and CL 32 latency.

The two memory modules included in the package allow dual channel operation for increased performance. The memory modules have a cooler colour of Melna and RGB backlighting.

The 32 GB of memory will suit users who want a smooth computing experience when working with multiple graphics applications at the same time and dealing with complex video editing, 3D modelling and rendering.

The data latency of this RAM is CL 32.

DDR5, which is this type of memory, has significantly higher data transfer rates and performance than DDR4.

XMP (Extreme Memory Profile), which is included with this memory, allows you to easily overclock RAM for faster performance.

The memory module features AMD EXPO technology, which enables easy memory overclocking, improved performance and best compatibility when selecting an AMD processor.

This DDR5 memory has a JEDEC speed of up to 4800 MHz. If you want to overclock to the maximum 6400 MHz speed, make sure your system board supports it.

The QVL (Memory Compatibility List) of the most popular manufacturers is available here.

Basic information
Capacity 32 GB

Memory capacity in Megabytes.

The modern operating systems require 1Gb or more RAM for ensuring stable and fast computer operation. At least 2Gb RAM is required for using MS Windows 7 (64 bit) for ensuring full functionality.
For dual memory support it is necessary to install pairs of memory where both memory modules are of equal capacity.

The type of RAM. Only one type of RAM modules can be used in one motherboard.

Parameter standards:

*Prior to buying the RAM you should verify whether the motherboard has a corresponding memory slot and the support for the relevant type of memory.

CL - the delay of memory cycles in miliseconds. It is recommendable to place identical CL memories in one motherboard. A lower CL time means higher operation speed, however, not all the motherboards can ensure stable operation with high-speed memories. Prior to buying the memory you should verify whether the motherboard supports the CL time that you have selected.The maximum high-speed of the memory in Megahertz. The memory of a higher clock frequency ensures stable operation under a lower clock frequency mode, for example, DDRII800 memory will operate under the DDRII667 and DDRII533 modes. However, when DDRII667 is installed together with DDRII800 memory the motherboard will display and operate in DDRII667 mode. Prior to buying a high-speed memory you should verify whether the motherboard supports the corresponding clock frequency (speed).
Maximum frequency 6400 MHz
The maximum high-speed of the memory in Megahertz. The memory of a higher clock frequency ensures stable operation under a lower clock frequency mode, for example, DDRII800 memory will operate under the DDRII667 and DDRII533 modes. However, when DDRII667 is installed together with DDRII800 memory the motherboard will display and operate in DDRII667 mode. Prior to buying a high-speed memory you should verify whether the motherboard supports the corresponding clock frequency (speed).

Memory capacity in Megabytes.

The modern operating systems require 1Gb or more RAM for ensuring stable and fast computer operation. At least 2Gb RAM is required for using MS Windows 7 (64 bit) for ensuring full functionality.
For dual memory support it is necessary to install pairs of memory where both memory modules are of equal capacity.

The type of RAM. Only one type of RAM modules can be used in one motherboard.

Parameter standards:

*Prior to buying the RAM you should verify whether the motherboard has a corresponding memory slot and the support for the relevant type of memory.

CL - the delay of memory cycles in miliseconds. It is recommendable to place identical CL memories in one motherboard. A lower CL time means higher operation speed, however, not all the motherboards can ensure stable operation with high-speed memories. Prior to buying the memory you should verify whether the motherboard supports the CL time that you have selected.
Type DDR5

The type of RAM. Only one type of RAM modules can be used in one motherboard.

Parameter standards:

*Prior to buying the RAM you should verify whether the motherboard has a corresponding memory slot and the support for the relevant type of memory.

Memory capacity in Megabytes.

The modern operating systems require 1Gb or more RAM for ensuring stable and fast computer operation. At least 2Gb RAM is required for using MS Windows 7 (64 bit) for ensuring full functionality.
For dual memory support it is necessary to install pairs of memory where both memory modules are of equal capacity.

CL - the delay of memory cycles in miliseconds. It is recommendable to place identical CL memories in one motherboard. A lower CL time means higher operation speed, however, not all the motherboards can ensure stable operation with high-speed memories. Prior to buying the memory you should verify whether the motherboard supports the CL time that you have selected.The maximum high-speed of the memory in Megahertz. The memory of a higher clock frequency ensures stable operation under a lower clock frequency mode, for example, DDRII800 memory will operate under the DDRII667 and DDRII533 modes. However, when DDRII667 is installed together with DDRII800 memory the motherboard will display and operate in DDRII667 mode. Prior to buying a high-speed memory you should verify whether the motherboard supports the corresponding clock frequency (speed).
CL CL 32
CL - the delay of memory cycles in miliseconds. It is recommendable to place identical CL memories in one motherboard. A lower CL time means higher operation speed, however, not all the motherboards can ensure stable operation with high-speed memories. Prior to buying the memory you should verify whether the motherboard supports the CL time that you have selected.

Memory capacity in Megabytes.

The modern operating systems require 1Gb or more RAM for ensuring stable and fast computer operation. At least 2Gb RAM is required for using MS Windows 7 (64 bit) for ensuring full functionality.
For dual memory support it is necessary to install pairs of memory where both memory modules are of equal capacity.

The type of RAM. Only one type of RAM modules can be used in one motherboard.

Parameter standards:

*Prior to buying the RAM you should verify whether the motherboard has a corresponding memory slot and the support for the relevant type of memory.

The maximum high-speed of the memory in Megahertz. The memory of a higher clock frequency ensures stable operation under a lower clock frequency mode, for example, DDRII800 memory will operate under the DDRII667 and DDRII533 modes. However, when DDRII667 is installed together with DDRII800 memory the motherboard will display and operate in DDRII667 mode. Prior to buying a high-speed memory you should verify whether the motherboard supports the corresponding clock frequency (speed).
KIT Kit of 2 modules
A pair of equal memory module that has been tested in the dual channel mode has been found. It is advisable to buy a Kit of 2 memory set if you want to achieve a guaranteed DualChannel stability.

Memory capacity in Megabytes.

The modern operating systems require 1Gb or more RAM for ensuring stable and fast computer operation. At least 2Gb RAM is required for using MS Windows 7 (64 bit) for ensuring full functionality.
For dual memory support it is necessary to install pairs of memory where both memory modules are of equal capacity.

The type of RAM. Only one type of RAM modules can be used in one motherboard.

Parameter standards:

*Prior to buying the RAM you should verify whether the motherboard has a corresponding memory slot and the support for the relevant type of memory.

CL - the delay of memory cycles in miliseconds. It is recommendable to place identical CL memories in one motherboard. A lower CL time means higher operation speed, however, not all the motherboards can ensure stable operation with high-speed memories. Prior to buying the memory you should verify whether the motherboard supports the CL time that you have selected.The maximum high-speed of the memory in Megahertz. The memory of a higher clock frequency ensures stable operation under a lower clock frequency mode, for example, DDRII800 memory will operate under the DDRII667 and DDRII533 modes. However, when DDRII667 is installed together with DDRII800 memory the motherboard will display and operate in DDRII667 mode. Prior to buying a high-speed memory you should verify whether the motherboard supports the corresponding clock frequency (speed).
Functionality
Cooler colour : Black
Lighting : RGB
Memory profile : AMD EXPO, Intel XMP
More detailed specification
Brand - ADATA
BrandPartCode - AX5U6400C3216G-DTLABRBK
CAS Latency - CL32
Category - Memory Modules
Category - Root/Electronics/PC parts/RAM
Category Code - MEM
Category_1 - Computer Memory
Category_2 - DDR5
CL - 32
CnCode CnCode - 84733020
Code - AX5U6400C3216G-DTLABRBK
Colour - Black
Description - LancerBlade DDR5 RGB Compact low-profile radiator LANCER BLADE RGB features a low-profile heatsink that fits perfectly into smaller computer cases and does not interfere with the operation of the tower CPU cooling system. Elegant geometric lines will add versatility and visual appeal to any housing.  Personalized RGB lighting Set the RGB lighting according to your preferences. Choose different effects (steady light, breathing light and comet effect) or sync the backlight to your favorite songs using the music mode. All this can be done using RGB lighting control software from all leading motherboard manufacturers. Personalized light show with XPG Prime XPG Prime lighting control software allows you to not only set unique DRAM lighting effects, but also sync all RGB-lit XPG products supported by Prime to create an original light show and personalize your Prime ecosystem. *After selecting Prime as the backlight control software, please close other backlight control software from ASUS/ASRock/Gigabyte/MSI. Conflicts may occur when using Prime with your motherboard's RGB software. Detailed information can be found in the FAQ section. **To use Prime after installing the MSI backlight control program, you must uninstall the MSI program, turn the power off, turn it on again, and then install and run Prime. Improved power management The XPG LANCER BLADE RGB DDR5 memory module has a built-in Power Management IC (PMIC) that increases power stability. Thanks to its lower operating voltage, the LANCER module is also more energy efficient than DDR4 memory. Stability and reliability With built-in error correction code (ECC) technology, this module provides real-time error correction that increases stability and reliability. Made of high-quality materials High-quality integrated circuits and printed circuit boards ensure uncompromising performance and stable overclocking, making this product a perfect solution for demanding gamers and overclockers. AMD EXPO Reliability and stability thanks to AMD EXPO (Extended Profiles for Overclocking) support and compatibility with the latest platforms. Easier overclocking Support for Intel XMP 3.0 profiles ensures easy overclocking without the need to configure complex BIOS settings. There is no need to repeatedly adjust and fine-tune overclocking parameters.
Description - The LANCER BLADE RGB adopts a low-profile heatsink design, removing height consideration from heatsink assembly, and making the product suitable for installation in small chassis. The heatsink is decorated in simple geometric lines, which are a versatile look when paired with various chassis types. The LANCER BLADE RGB has undergone strict component selection and screening procedures, and passed reliability and compatibility tests. It is strong and durable, offering the highest quality! Users can use RGB software provided by major motherboard manufacturers or use XPG PRIME lighting effect software to freely control RGB effects and link all supported products for a customized light show. The LANCER BLADE RGB supports AMD EXPO and is compatible with the latest AMD platform. It also supports Intel XMP 3.0 overclocking, providing players with excellent overclocking performance.
dimensionalWeight - 47
dimension depth - 10 mm
dimension height - 170 mm
Dimensions - 7,86 x 40 x 133,35 mm
dimension weight - 103 g
dimension width - 140 mm
EAN - 4711085944962
ean - 4711085944962
Eans - 4711085944962
EAN_code - 4711085944962
ECC support - Yes
Features - Buffered memory type - Unregistered (unbuffered)
Features - CAS latency - 32
Features - Component for - PC
Features - Cooling type - Heatsink
Features - ECC - Yes
Features - Intel Extreme Memory Profile (XMP) - Yes
Features - Intel Extreme Memory Profile (XMP) version - 3.0
Features - Internal memory - 32 GB
Features - Internal memory type - DDR5
Features - Memory clock speed - 6400 MHz
Features - Memory form factor - 288-pin DIMM
Features - Memory layout (modules x size) - 2 x 16 GB
Features - Memory voltage - 1.1 V
Features - Memory voltage - 1.1,1.4 V
Features - Memory voltage - 1.4 V
Features - RGB backlighting - Yes
Frequency speed - 6400 MHz
Full Description Line - XPG LANCER BLADE RGB|Performance Gaming|DDR5|Module capacity 16GB|Quantity 2|6400 MHz|288-pin DIMM|CL 32|Memory timings 32-39-39|Nominal voltage 1.4 V|RGB|Colour Black
GTIN - 4711085944962
guarantee - 0
guarantee_type - perpetual
LongDesc - LANCER BLADE DDR5SLEEK EFFICIENCY, COMPACT POWERCompact Low-Profile Heatsink DesignThe LANCER BLADE boasts a low-profile heatsink that fits perfectly in smaller PC cases and avoids interference with tower CPU coolers. Its sleek geometric lines add versatility and visual appeal to any case design.Enhanced Power ManagementThe XPG LANCER BLADE DDR5 features a built-in Power Management IC (PMIC) that enhance power supply stability. It's lower operating voltage also make LANCER more power-efficient than DDR4.Stability and ReliabilityWith On-die error correcting code (ECC), this DDR5 memory module can correct errors in real-time to provide increased stability and reliability.Made with High-Quality MaterialsHigh-quality ICs and PCBs ensure uncompromised performance and reliable overclocking, ideal for discerning gamers and overclockers.AMD EXPOSupport for AMD EXPO (EXtended Profiles for Overclocking) and compatibility with the latest platforms for reliability and stability.Overclocking Made EasyWith support for Intel XMP 3.0, get overclocking easily without the need to hassle with BIOS settings. There is no need to repeatedly adjust and fine-tune overclocking parameters.
LongProductName - DDR5, 6400 MHz, 2 x 16 GB, 133.35 x 33.8 x 7.8 mm
LongSummaryDescription - ADATA Lancer Blade. Component for: PC, Internal memory: 32 GB, Memory layout (modules x size): 2 x 16 GB, Internal memory type: DDR5, Memory clock speed: 6400 MHz, Memory form factor: 288-pin DIMM, CAS latency: 32, ECC
Manufacturer - ADATA
Manufacturer_code - AX5U6400C3216G-DTLABRBK
Memory > Component for - PC/server
Memory > ECC - Yes
Memory > Internal memory type - DDR5
Memory > Memory clock speed - 6400 MHz
Memory > Memory layout (modules x size) - 2x16 GB
Memory > Registered - No
Memory bus frequency - 6400 MHz
Memory module capacity - 16GB
Memory series - XPG LANCER BLADE RGB
Memory timings - 32-39-39
Memory type - DDR5
Memory type - DDR5
Module form factor - 288-pin DIMM
Name - ADATA 32 GB | DDR5 | 6400 MHz | PC/server | Registered No | ECC Yes
Name - ADATA DDR5 - 32GB - 6400 - CL - 32 (2x 16 GB) dual kit, RAM (black, AX5U6400C3216G-DTLABRBK, XPG Lancer Blade RGB, INTEL XMP, AMD EXPO)
Name - Adata XPG LancerBlade RGB 32GB [2x16GB 6400MHz DDR5 CL32 DIMM]
name - Memory LancerBlade DDR5 6400 32GB (2x16) CL32 RGB
Nominal voltage - 1.4 V
Number of memory cards in set - 2
Number of modules - 2
Operational conditions - Operating temperature (T-T) - 0 - 85 °C
Operational conditions - Storage temperature (T-T) - -20 - 65 °C
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 340.00 mm
Package features > Gross height (mm) - 212.00 mm
Package features > Gross width (mm) - 300.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 400 pc(s)
Package features > Paper/Pasteboard - 70.00 g
Package features > Plastic (No PET) - 15.00 g
Package features > Tare weight (kg) - 0.09 kg
Package features > Volume (m3) - 0.02 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Packaging data - Package type - Blister
Performance - Gaming
Performance > Capacity - 32 GB
producer - Adata
Producer - Adata
producerCode - AX5U6400C3216G-DTLABRBK
ProducerCode - AX5U6400C3216G-DTLABRBK
productName - ADATA Lancer Blade RGB memory module 32 GB 2 x 16 GB DDR5 6400 MHz ECC
ProductName - Lancer Blade
productSize - Normal
Radiator - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 17.5 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 1.17 kg
Shipping Box Width Shipping/Package Box Dimensions - 14.5 cm
ShortDescription - 32GB | 2x16GB | 6400MHz | DDR5 | CL32 | DIMM | RGB
ShortSummaryDescription - ADATA Lancer Blade, 32 GB, 2 x 16 GB, DDR5, 6400 MHz, 288-pin DIMM
sizeX - 170
sizeY - 140
sizeZ - 10
Specific features - RGB
Technical details > Gross weight - 0.13 kg
Technical details > Net weight - 0.05 kg
Technical details > Producer - ADATA
Technical details > Producer product family - XPG
Technical details > Producer product name - LANCER BLADE RGB
Technical_details - The ADATA AX5U6400C3216G-DTLABRBK is a kit of 2x 16 GB DDRX-6400 (PCX-51200) memory modules from the XPG Lancer Blade RGB series. The total capacity is 32 GB. The 288-pin module supports a latency of 32 at 6400 MHz and requires 1.3 volts of voltage. Intel's XMP version 3.0 and AMD EXPO are supported. Item no.: 100011563 Type SDRAM-DDR5 Color: Black EAN 4711085944962 Manufacturer no. AX5U6400C3216G-DTLABRBK XPG Lancer Blade RGB series Capacity 32 GB (2 x 16 GB) Number 2 pieces DIMM design Profiles INTEL XMP (version 3.0), AMD EXPO 288-pin connector Voltage 1.3 volts (from 1.1 to 1.4 volts) Standard DDR5-6400 (PC5-51200) Timings CAS Latency (CL) 32
Title - ADATA Lancer Blade memory module 32 GB 2 x 16 GB DDR5 6400 MHz ECC
Total capacity - 32GB
Total memory capacity - 32 GB
Unit Box Height - 0.015
Unit Box Length - 0.175
Unit Box Width - 0.145
Unit Brutto Volume - 0.0003806 cubm
Unit Gross Weight - 1.17 kg
Unit Net Weight - 0.065 kg
URL - https://www.xpg.com/us/xpg/dram-modules-lancer-blade-ddr5?tab=spec
Vendor Homepage - www.adata.com
vendpn - AX5U6400C3216G-DTLABRBK
Warranty - 36
Warranty - 36 month(s)
Warranty - X months
WarrantyInfo - Limited lifetime warranty
warrantyType - W
Weight - 0,40
Weight - 82.22 g
weight - 120
Weight & dimensions - Depth - 133.3 mm
Weight & dimensions - Height - 7.8 mm
Weight & dimensions - Weight - 32.9 g
Weight & dimensions - Width - 33.8 mm
121.12 €
ADATA XPG Lancer Blade RGB Black, 32GB, DDR5, 6400MHz, CL32, Kit of 2
Intel technology provider Platinum 2020
All categories