ID: 913180
Product code: MTFDDAK1T9TGB-1BC1ZABYYR
In stock 30 units
Warranty: 3 years
Micron 5400 MAX, 1.92TB, SATA III, 2.5"
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
Delivery options
- Delivery to Smartpost parcel locker 6.99 €: {delivery_2_txt_full}
- Courier delivery 11.99 €: on Wednesday, 27.11.2024
Main product parameters All parameters
- Capacity: 1.92TB
- Type: SATA
- Read speed (sequential): 540 MB/s
- Write speed (sequential): 520 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
Description
We offer to purchase a Micron 2.5" format SSD drive with a 1.92TB capacity.
The drive is equipped with the classic SATA port, which requires standard SATA data and power cables.
This is a SATA type of disk. Even though this SSD disk operates with an older SATA III protocol, it is fully suitable for both everyday tasks and situations when it's important to reduce costs.
This SSD disk read speed (Sequential read speed) is 540 MB/s. Keep in mind that "fast" disks without a proper cooling solution may not reach the speeds indicated by the manufacturer.
520 MB/s - this SSD drive is capable of achieving such data writing speed. The speed parameters promised by the manufacturer may not be reached if the "fast" disk is not provided with an appropriate cooling system.
This SSD drive has an 2.5" format.
This SSD disk has a SATA III (6Gb/s) interface. Keep in mind that if you insert a disk with a newer interface (for example, with PCIe 4.0 or 5.0) into an older interface slot (for example, PCIe 3.0), the disk speed will decrease because the disk will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
1.92TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
540 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
520 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Ports and equipment
Form factor
2.5"
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Random Read IOPS
: 94K
More detailed specification
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Not applicable
Depth - 100.45 mm
Description -
Description - The Industry’s Most Advanced Data Center SATA SSD The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds. Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD.2 With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB
dimensionalWeight - 39
dimension depth - 13 mm
dimension height - 100 mm
dimension weight - 64 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
DWPD - 5
ean - 649528933669
EAN_code - 0649528933669
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - DWPD - 5
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - Serial ATA
Features - Memory type - 3D TLC NAND
Features - NVMe - No
Features - Product series - 5400 MAX
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 63000 IOPS
Features - Security algorithms - 256-bit AES
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - Uncorrectable Bit Error Rate (UBER) - < 1 per 10^17 bits read
Form Factor - 2,5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series 5400 Max|1.92TB|Technology 3D TLC|Write speed 520 MBytes/sec|Read speed 540 MBytes/sec|Form Factor 2,5"|DWPD 5|MTBF 3000000 hours|Drive thickness 7mm
guarantee - 60
guarantee_type - normal
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Manufacturer - Micron
Manufacturer_code - MTFDDAK1T9TGB-1BC1ZABYYR
Model - 5400 MAX
Model - MTFDDAK1T9TGB-1BC1ZABYY
MTBF - 3e+006 hours
Name - Micron 5400 MAX 1920 GB (black, SATA 6 Gb/s, 2.5)
name - SSD drive 5400 MAX 1920GB SATA 2.5 7mm Single Pack
NAND flash technology - 3D TLC
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Other features -
producer - Micron
producerCode - MTFDDAK1T9TGB-1BC1ZABYYR
productName - SSD Micron 5400 MAX 1.92TB SATA 2.5" MTFDDAK1T9TGB-1BC1ZABYYR (DWPD 5)
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 63 K
Reading speed - 540 MB/s
Read speed - 540 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.07 kg
Shipping Box Width Shipping/Package Box Dimensions - 10 cm
sizeX - 130
sizeY - 15
sizeZ - 100
SSD Capacity - 1.92TB
SSD series - 5400 Max
Unit Box Height - 0.015
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Brutto Volume - 0.000195 cubm
Unit Gross Weight - 0.07 kg
Unit Net Weight - 0.065 kg
Vendor Homepage - media-www.micron.com/-/media/client/global/documents/products/product-flyer/5400_product_brief.pdf?la=en&rev=c11ea20b11fd4391b5b1aae897b79e8b
vendpn - MTFDDAK1T9TGB-1BC1ZABYYR
Warranty - 60L months
warrantyLength - 60
warrantyType - G
Weight - 0,70
weight - 70
Weight - 70 g
Weight & dimensions - Depth - 100.5 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 70 g
Weight & dimensions - Width - 69.8 mm
Width - 69.85 mm
Write speed - 520 MBytes/sec
Writing speed - 520 MB/s
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Not applicable
Depth - 100.45 mm
Description -
Description - The Industry’s Most Advanced Data Center SATA SSD The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds. Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD.2 With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB
dimensionalWeight - 39
dimension depth - 13 mm
dimension height - 100 mm
dimension weight - 64 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
DWPD - 5
ean - 649528933669
EAN_code - 0649528933669
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - DWPD - 5
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - Serial ATA
Features - Memory type - 3D TLC NAND
Features - NVMe - No
Features - Product series - 5400 MAX
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 63000 IOPS
Features - Security algorithms - 256-bit AES
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - Uncorrectable Bit Error Rate (UBER) - < 1 per 10^17 bits read
Form Factor - 2,5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series 5400 Max|1.92TB|Technology 3D TLC|Write speed 520 MBytes/sec|Read speed 540 MBytes/sec|Form Factor 2,5"|DWPD 5|MTBF 3000000 hours|Drive thickness 7mm
guarantee - 60
guarantee_type - normal
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Manufacturer - Micron
Manufacturer_code - MTFDDAK1T9TGB-1BC1ZABYYR
Model - 5400 MAX
Model - MTFDDAK1T9TGB-1BC1ZABYY
MTBF - 3e+006 hours
Name - Micron 5400 MAX 1920 GB (black, SATA 6 Gb/s, 2.5)
name - SSD drive 5400 MAX 1920GB SATA 2.5 7mm Single Pack
NAND flash technology - 3D TLC
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Other features -
producer - Micron
producerCode - MTFDDAK1T9TGB-1BC1ZABYYR
productName - SSD Micron 5400 MAX 1.92TB SATA 2.5" MTFDDAK1T9TGB-1BC1ZABYYR (DWPD 5)
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 63 K
Reading speed - 540 MB/s
Read speed - 540 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.07 kg
Shipping Box Width Shipping/Package Box Dimensions - 10 cm
sizeX - 130
sizeY - 15
sizeZ - 100
SSD Capacity - 1.92TB
SSD series - 5400 Max
Unit Box Height - 0.015
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Brutto Volume - 0.000195 cubm
Unit Gross Weight - 0.07 kg
Unit Net Weight - 0.065 kg
Vendor Homepage - media-www.micron.com/-/media/client/global/documents/products/product-flyer/5400_product_brief.pdf?la=en&rev=c11ea20b11fd4391b5b1aae897b79e8b
vendpn - MTFDDAK1T9TGB-1BC1ZABYYR
Warranty - 60L months
warrantyLength - 60
warrantyType - G
Weight - 0,70
weight - 70
Weight - 70 g
Weight & dimensions - Depth - 100.5 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 70 g
Weight & dimensions - Width - 69.8 mm
Width - 69.85 mm
Write speed - 520 MBytes/sec
Writing speed - 520 MB/s
