Lexar NS100, 2TB, 2.5" SATA III

Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
ID: 877801 Product code: LNS100-2TRB
In stock 31 units
Warranty: 3 years
129.66 €
Delivery options
  • Delivery to Smartpost parcel locker 6.99 €: {delivery_2_txt_full}
  • Courier delivery 11.99 €: on Thursday, 28.11.2024
Main product parameters All parameters
  • Capacity: 2 TB
  • Type: SATA
  • Read speed (sequential): 550 MB/s
  • Write speed (sequential): 500 MB/s
  • Form factor: 2.5"
  • Interface: SATA III (6Gb/s)
Description

Available for purchase, the Lexar 2.5" format SSD disk with a large volume of 2 TB.

This disk uses the standard SATA interface, which operates with traditional SATA data and power cables.

This is a SATA type of disk. Even though this SSD disk operates with an older SATA III protocol, it is fully suitable for both everyday tasks and situations when it's important to reduce costs.

The read speed for this SSD drive reaches 550 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.

500 MB/s - this SSD drive is capable of achieving such data writing speed. The speed parameters promised by the manufacturer may not be reached if the "fast" disk is not provided with an appropriate cooling system.

This is an SSD disk in the 2.5" format.

The SSD drive has a SATA III (6Gb/s) interface. If it is inserted into an older interface slot, the potential speed of the drive will not be fully utilized, as the older interface will not provide sufficient data transfer bandwidth.

Basic information
Capacity 2 TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type : SATA
Read speed (sequential) 550 MB/s

Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.

If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.

Write speed (sequential) 500 MB/s

The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.

Functionality
Radiators : Nav
Lighting : Nav
Ports and equipment
Form factor 2.5"

Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.

1.8" discs are intended for the ultra-compact class portable computers.

PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.

Interface : SATA III (6Gb/s)
Interface SATA

SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.

The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.

Specifikācija
Memory type : TLC (Triple-Level Cell)
Random Read IOPS : Not indicated
Random Write IOPS : Not indicated
Endurance (TBW) : 1000 TB
More detailed specification
Category - Root/Electronics/PC parts/Hard drives
Category Code - SSM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Code - LNS100-2TRB
Color - Not applicable
Combined (other) - 0.7000 g
Depth - 100.2 mm
Description -
Description - Lexar NS100 2.5” SATA III (6Gb/s) SSD
Design > SSD form factor - 2.5
dimension depth - 20 mm
dimension height - 165 mm
Dimensions - 69.85mm x 100.2mm x 7mm
dimension weight - 70 g
dimension width - 110 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
EAN - 843367120758
ean - 843367120758
Eans - 843367120758
EAN_code - 0843367120758
Form Factor - 2,5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series NS100|2TB|SATA 3.0|Write speed 500 MBytes/sec|Read speed 550 MBytes/sec|Form Factor 2,5"|Drive thickness 7mm
guarantee - 36
guarantee_type - normal
HDD capacity - 2 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Link - https://www.lexar.com/product/ssd-ns100/
Manufacturer - Lexar
Manufacturer_code - LNS100-2TRB
Model - NS100
Name - Lexar NS100 2TB
Name - Lexar SSD 2TB 500/550 NS100 SA3
Name - Lexar | SSD | NS100 | 2000 GB | SSD form factor 2.5 | Solid-state drive interface SATA III | Read speed 550 MB/s
name - SSD drive NS100 2TB SATA3 2.5 550/500MB/s
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 168.00 mm
Package features > Gross height (mm) - 15.00 mm
Package features > Gross width (mm) - 105.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 6531 pc(s)
Package features > Paper/Pasteboard - 20.00 g
Package features > PET - 1 g
Package features > Plastic (No PET) - 9.00 g
Package features > Tare weight (kg) - 0.03 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEE classification - CL109:5:2017-04-01
Package features > WEEE tax - No
Performance > Data transfer rate - 6 Gbit/s
Performance > Read speed - 550 MB/s
Performance > Solid-state drive capacity - 2000 GB
Performance > Solid-state drive interface - SATA III
producer - Lexar
Producer - Lexar
ProducerCode - LNS100-2TRB
Producer product family - SSD
Producer product name - NS100
Reading speed - 550 MB/s
Read speed - 550 MBytes/sec
SATA 3.0 Interface - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 16.5 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.07 kg
Shipping Box Width Shipping/Package Box Dimensions - 11 cm
ShortDescription - 2.5'' | SSD | 12TB |550/500 MB/s | Serial ATA3
SSD Capacity - 2TB
SSD series - NS100
TBW - 960 TB
Technical details > Gross weight - 0.06 kg
Technical details > Net weight - 0.03 kg
Technical details > Producer - Lexar
Unit Box Height - 0.015
Unit Box Length - 0.165
Unit Box Width - 0.11
Unit Brutto Volume - 0.0002722 cubm
Unit Gross Weight - 0.07 kg
Unit Net Weight - 0.034 kg
Vendor Homepage - lexar.com/en/product/lexar-ns100-2-5-sata-iii-6gb-s-ssd/
vendpn - LNS100-2TRB
Warranty - 36
Warranty - 36 month(s)
Warranty - 36 months
Weight - 0,07
Weight - 34 g
Width - 69.85 mm
Write speed - 500 MBytes/sec
Writing speed - 500 MB/s
129.66 €
Lexar NS100, 2TB, 2.5" SATA III
Intel technology provider Platinum 2020
All categories