ID: 834126
Product code: ALEG-710-1TCS
In stock >50 units
Warranty: 3 years
ADATA Legend 710, 1TB, M.2 Gen3 x4
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
Delivery options
- Delivery to Smartpost parcel locker 6.99 €: {delivery_2_txt_full}
- Courier delivery 11.99 €: on Wednesday, 27.11.2024
Main product parameters All parameters
- Capacity: 1 TB
- Type: NVMe
- Read speed (sequential): 2400 MB/s
- Write speed (sequential): 1800 MB/s
- Form factor: M.2 80mm (2280)
- Interface: PCIe 3.0 x4
Description
This Adata brand SSD has a 1 TB capacity and a M.2 80mm (2280) format.
This SSD drive has a compact and modern M.2 connector.
This is a fast-acting NVME SSD drive, based on PCIe technology. It allows data to be transmitted in parallel over multiple channels, ensuring excellent performance. This type of drive is perfectly suited for activities such as processing large files, gaming, and video editing, where maximum data transmission speed is required.
The read speed for this SSD drive reaches 2400 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.
The write speed (Sequential write speed) of this SSD is 1800 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.
This SSD drive is equipped with a heatsink or a cooler, which helps to keep the memory chips cool and ensure stable writing and reading speed during prolonged operation. Even if a "fast" drive without a heatsink is chosen, in 99% of cases the system board will be equipped with an M.2 slot cooler.
This is an SSD disk in the M.2 80mm (2280) format.
This SSD disk has a PCIe 3.0 x4 interface. Keep in mind that if you insert a disk with a newer interface (for example, with PCIe 4.0 or 5.0) into an older interface slot (for example, PCIe 3.0), the disk speed will decrease because the disk will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
1 TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: NVMe
Read speed (sequential)
2400 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
1800 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Ir
Lighting
: Nav
Ports and equipment
Form factor
M.2 80mm (2280)
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: PCIe 3.0 x4
Interface
M.2
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: 180K
Random Write IOPS
: 150K
Endurance (TBW)
: 260 TB
More detailed specification
Category - Root/Electronics/PC parts/Hard drives
Category Code - SSU
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
Code - ALEG-710-1TCS
Color - Not applicable
Depth - 80 mm
Description - LEGEND 710 Dysk LEGEND 710 obsługuje interfejs PCIe Gen 3x4 i NVMe 1.4, co przekłada się na szybkości długotrwałego odczytu i zapisu sięgające 2400/1800 MB na sekundę. Specyfikacja M.2 2280 zapewnia obsługę najnowszych platform Intel i AMD, zarówno w przypadku komputerów stacjonarnych, jak i laptopów.
Optymalne chłodzenie
Subtelny, ale elegancki wygląd radiatora dysku LEGEND 710 cechują odcienie królewskiego błękitu oraz wyjątkowe wykończenie w złotym kolorze. Radiator obniża temperaturę o 15%, zapewniając optymalną wydajność i stabilność.
Wsparcie w tworzeniu
Kreatywność nie może czekać! Dzięki buforowaniu SLC i technologii HMB (ang. Host Memory Buffer) dysk LEGEND 710 zapewnia niezakłóconą produktywność.
Bezpieczeństwo pracy twórczej
Dzięki technologii kodu LDPC (ang. Low Density Parity Check) i 256-bitowemu szyfrowaniu AES dysk LEGEND 710 zapewnia dokładność transmisji danych oraz bezpieczeństwo.
3-letnia gwarancja
W dyskach SSD z serii LEGEND stosowane są wyłącznie wysokiej jakości układy scalone, które przeszły rygorystyczne testy. Dyski są ponadto objęte 3-letnią gwarancją, która zapewni Ci spokój użytkowania.
Description - LEGEND 710 PCIe Gen3 x4 M.2 2280 Solid State Drive ? PCIe Gen3 x4 interface ? Excellent read/write performance ? Heat sink keeps things 15% cooler ? Great upgrade option for creators ? High capacities ? Supports NVMe 1.4 ? LDPC & AES 256-bit encryption ? Supports Host Memory Buffer(HMB)
Design > SSD form factor - M.2 2280
dimensionalWeight - 45
dimension depth - 15 mm
dimension height - 130 mm
Dimensions - 80 x 22 x 3.13mm
dimension weight - 31 g
dimension width - 105 mm
Disk type - SSD
Drive type - Internal
EAN - 4711085937841
ean - 4711085937841
Eans - 4711085937841
EAN_code - 4711085937841
Features - Component for - PC/Laptop
Features - ECC - Yes
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - PCI Express 3.0
Features - Mean time between failures (MTBF) - 1500000 h
Features - Memory type - 3D NAND
Features - NVMe - Yes
Features - NVMe version - 1.4
Features - PCI Express interface data lanes - x4
Features - Random read (4KB) - 180000 IOPS
Features - Random write (4KB) - 150000 IOPS
Features - Read speed - 2400 MB/s
Features - Security algorithms - 256-bit AES
Features - Sequential read speed (AS SSD) - 2400 MB/s
Features - Sequential read speed (ATTO) - 2400 MB/s
Features - Sequential read speed (CDM) - 2400 MB/s
Features - Sequential write speed (AS SSD) - 1800 MB/s
Features - Sequential write speed (ATTO) - 1800 MB/s
Features - Sequential write speed (CDM) - 1800 MB/s
Features - SSD capacity - 1 TB
Features - SSD form factor - M.2
Features - TBW rating - 260
Features - Write speed - 1800 MB/s
Form Factor - M.2
Form factor (width) - M.2 2280
Full Description Line - SSD series LEGEND 710|1TB|Form Factor M.2|PCIE|NVMe|Technology 3D NAND|Write speed 1800 MBytes/sec|Read speed 2400 MBytes/sec|TBW 260 TB|MTBF 1500000 hours
guarantee - 36
guarantee_type - normal
HDD capacity - 1 TB
HDD interface - PCI-Express
Height - 2.15 mm
Link - https://www.adata.com/us/consumer/solid-state-drives-LEGEND-710?tab=specification
Manufacturer - ADATA
Manufacturer_code - ALEG-710-1TCS
Model - LEGEND 710
MTBF - 1.5e+006 hours
Name - ADATA LEGEND 710 1 TB, SSD (blue/gold, PCIe 3.0 x4, NVMe 1.4, M.2 2280)
Name - Adata LEGEND 710 M.2 PCIe NVMe 1TB
Name - ADATA | LEGEND 710 | 1000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe Gen3x4 | Read speed 2400 MB/s | Write speed 1800 MB/s
name - SSD drive LEGEND 710 1TB PCIe 3x4 2.4/1.8 GB/s M2
NAND flash technology - 3D NAND
NVMe - Yes
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features - Wymiary z radiatorem: 3,13 x 22 x 80 mm Waga z radiatorem: 9 g
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 17 mm
Package features > Gross height (mm) - 130 mm
Package features > Gross width (mm) - 104 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7518 pc(s)
Package features > Paper/Pasteboard - 14 g
Package features > PET - 20.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.024 kg
Package features > Volume (m3) - 0.00022984 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Packaging data - Package type - Box
PCIE Interface - Yes
Performance > Read speed - 2400 MB/s
Performance > Solid-state drive capacity - 1000 GB
Performance > Solid-state drive interface - PCIe Gen3x4
Performance > Write speed - 1800 MB/s
producer - Adata
Producer - Adata
producerCode - ALEG-710-1TCS
ProducerCode - ALEG-710-1TCS
Producer product name - LEGEND 710
productName - ADATA LEGEND 710 M.2 1000 GB PCI Express 3.0 3D NAND NVMe
productSize - Normal
Random read IOPS (max) - 180 K
Random write IOPS (max) - 150 K
Reading speed - 2400 MB/s
Read speed - 2400 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 10.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.032 kg
Shipping Box Width Shipping/Package Box Dimensions - 2 cm
ShortDescription - SSD | 1TB | 2400/1800 MB/s | M.2 | 2280 | PCI-E 3x4|3D NAND | gwarancja ograniczona parametrem TBW
sizeX - 130
sizeY - 17
sizeZ - 103
SSD Capacity - 1TB
SSD series - LEGEND 710
TBW - 260 TB
TBW - 260 TB
Technical details - Sustainability certificates - CE
Technical details - Sustainability certificates - RoHS
Technical details > Gross weight - 0.031 kg
Technical details > NAND flash component - 3D NAND
Technical details > Net weight - 0.007 kg
Technical details > Other features - The heat sink works to keep temperatures down by 15% for optimal performance and stability
Technical details > Producer - ADATA
Technical details > Warranty - 60 month(s)
Technical_details - LEGEND 710 1TB, SSD The ADATA LEGEND 710 SSD uses the PCIe 3.0 x4 interface with NVMe 1.4 specification to offer high performance for creative expression. With read/write speeds of up to 2,400/1,800 MB/s, the LEGEND 710 is significantly faster than SATA SSDs. The LEGEND 710 is also equipped with SLC caching and HMB (Host Memory Buffer) for uninterrupted productivity. The LEGEND 710's understated yet elegant heatsink design features a royal blue color scheme with gold-tone trim. The heatsink reduces temperatures by up to 15% for optimal performance and stability. Type: SSD Colour: blue/gold EAN: 4711085937841 Manufacturer No.: ALEG-710-1TCS Series: LEGEND 710 Design: plug-in card Capacity: 1TB Interface: 1x M.2 (M.2 module key: M) Internal interface: PCIe 3.0 Data transfer rate: Read | 2,400MB/s Data transfer rate: Write | 1,800MB/s IOPS: Read | 180,000 IOPS: Write | 150,000 MTBF: 1,500,000 hours TBW: 260TB Feature: Heatsink, SLC Caching, HMB, LDPC ECC, AES 256-bit Encryption Dimensions: Width: 22mm x Height: 3.13mm x Depth/Length: 80mm Weight: 9 grams
Unit Box Height - 0.105
Unit Box Length - 0.13
Unit Box Width - 0.02
Unit Brutto Volume - 0.000273 cubm
Unit Gross Weight - 0.032 kg
Unit Net Weight - 0.009 kg
Vendor Homepage - www.adata.com/us/consumer/solid-state-drives-LEGEND-710
vendpn - ALEG-710-1TCS
Warranty - 36L months
Warranty - 60
warrantyLength - 36
warrantyType - G
Weight - 0,03
Weight - 6.2 g
weight - 30
Weight & dimensions - Depth - 80 mm
Weight & dimensions - Height - 3.13 mm
Weight & dimensions - Weight - 9 g
Weight & dimensions - Width - 22 mm
Width - 22 mm
Write speed - 1800 MBytes/sec
Writing speed - 1800 MB/s
Category Code - SSU
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
Code - ALEG-710-1TCS
Color - Not applicable
Depth - 80 mm
Description - LEGEND 710 Dysk LEGEND 710 obsługuje interfejs PCIe Gen 3x4 i NVMe 1.4, co przekłada się na szybkości długotrwałego odczytu i zapisu sięgające 2400/1800 MB na sekundę. Specyfikacja M.2 2280 zapewnia obsługę najnowszych platform Intel i AMD, zarówno w przypadku komputerów stacjonarnych, jak i laptopów.
Optymalne chłodzenie
Subtelny, ale elegancki wygląd radiatora dysku LEGEND 710 cechują odcienie królewskiego błękitu oraz wyjątkowe wykończenie w złotym kolorze. Radiator obniża temperaturę o 15%, zapewniając optymalną wydajność i stabilność.
Wsparcie w tworzeniu
Kreatywność nie może czekać! Dzięki buforowaniu SLC i technologii HMB (ang. Host Memory Buffer) dysk LEGEND 710 zapewnia niezakłóconą produktywność.
Bezpieczeństwo pracy twórczej
Dzięki technologii kodu LDPC (ang. Low Density Parity Check) i 256-bitowemu szyfrowaniu AES dysk LEGEND 710 zapewnia dokładność transmisji danych oraz bezpieczeństwo.
3-letnia gwarancja
W dyskach SSD z serii LEGEND stosowane są wyłącznie wysokiej jakości układy scalone, które przeszły rygorystyczne testy. Dyski są ponadto objęte 3-letnią gwarancją, która zapewni Ci spokój użytkowania.
Description - LEGEND 710 PCIe Gen3 x4 M.2 2280 Solid State Drive ? PCIe Gen3 x4 interface ? Excellent read/write performance ? Heat sink keeps things 15% cooler ? Great upgrade option for creators ? High capacities ? Supports NVMe 1.4 ? LDPC & AES 256-bit encryption ? Supports Host Memory Buffer(HMB)
Design > SSD form factor - M.2 2280
dimensionalWeight - 45
dimension depth - 15 mm
dimension height - 130 mm
Dimensions - 80 x 22 x 3.13mm
dimension weight - 31 g
dimension width - 105 mm
Disk type - SSD
Drive type - Internal
EAN - 4711085937841
ean - 4711085937841
Eans - 4711085937841
EAN_code - 4711085937841
Features - Component for - PC/Laptop
Features - ECC - Yes
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - PCI Express 3.0
Features - Mean time between failures (MTBF) - 1500000 h
Features - Memory type - 3D NAND
Features - NVMe - Yes
Features - NVMe version - 1.4
Features - PCI Express interface data lanes - x4
Features - Random read (4KB) - 180000 IOPS
Features - Random write (4KB) - 150000 IOPS
Features - Read speed - 2400 MB/s
Features - Security algorithms - 256-bit AES
Features - Sequential read speed (AS SSD) - 2400 MB/s
Features - Sequential read speed (ATTO) - 2400 MB/s
Features - Sequential read speed (CDM) - 2400 MB/s
Features - Sequential write speed (AS SSD) - 1800 MB/s
Features - Sequential write speed (ATTO) - 1800 MB/s
Features - Sequential write speed (CDM) - 1800 MB/s
Features - SSD capacity - 1 TB
Features - SSD form factor - M.2
Features - TBW rating - 260
Features - Write speed - 1800 MB/s
Form Factor - M.2
Form factor (width) - M.2 2280
Full Description Line - SSD series LEGEND 710|1TB|Form Factor M.2|PCIE|NVMe|Technology 3D NAND|Write speed 1800 MBytes/sec|Read speed 2400 MBytes/sec|TBW 260 TB|MTBF 1500000 hours
guarantee - 36
guarantee_type - normal
HDD capacity - 1 TB
HDD interface - PCI-Express
Height - 2.15 mm
Link - https://www.adata.com/us/consumer/solid-state-drives-LEGEND-710?tab=specification
Manufacturer - ADATA
Manufacturer_code - ALEG-710-1TCS
Model - LEGEND 710
MTBF - 1.5e+006 hours
Name - ADATA LEGEND 710 1 TB, SSD (blue/gold, PCIe 3.0 x4, NVMe 1.4, M.2 2280)
Name - Adata LEGEND 710 M.2 PCIe NVMe 1TB
Name - ADATA | LEGEND 710 | 1000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe Gen3x4 | Read speed 2400 MB/s | Write speed 1800 MB/s
name - SSD drive LEGEND 710 1TB PCIe 3x4 2.4/1.8 GB/s M2
NAND flash technology - 3D NAND
NVMe - Yes
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features - Wymiary z radiatorem: 3,13 x 22 x 80 mm Waga z radiatorem: 9 g
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 17 mm
Package features > Gross height (mm) - 130 mm
Package features > Gross width (mm) - 104 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7518 pc(s)
Package features > Paper/Pasteboard - 14 g
Package features > PET - 20.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.024 kg
Package features > Volume (m3) - 0.00022984 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Packaging data - Package type - Box
PCIE Interface - Yes
Performance > Read speed - 2400 MB/s
Performance > Solid-state drive capacity - 1000 GB
Performance > Solid-state drive interface - PCIe Gen3x4
Performance > Write speed - 1800 MB/s
producer - Adata
Producer - Adata
producerCode - ALEG-710-1TCS
ProducerCode - ALEG-710-1TCS
Producer product name - LEGEND 710
productName - ADATA LEGEND 710 M.2 1000 GB PCI Express 3.0 3D NAND NVMe
productSize - Normal
Random read IOPS (max) - 180 K
Random write IOPS (max) - 150 K
Reading speed - 2400 MB/s
Read speed - 2400 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 10.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.032 kg
Shipping Box Width Shipping/Package Box Dimensions - 2 cm
ShortDescription - SSD | 1TB | 2400/1800 MB/s | M.2 | 2280 | PCI-E 3x4|3D NAND | gwarancja ograniczona parametrem TBW
sizeX - 130
sizeY - 17
sizeZ - 103
SSD Capacity - 1TB
SSD series - LEGEND 710
TBW - 260 TB
TBW - 260 TB
Technical details - Sustainability certificates - CE
Technical details - Sustainability certificates - RoHS
Technical details > Gross weight - 0.031 kg
Technical details > NAND flash component - 3D NAND
Technical details > Net weight - 0.007 kg
Technical details > Other features - The heat sink works to keep temperatures down by 15% for optimal performance and stability
Technical details > Producer - ADATA
Technical details > Warranty - 60 month(s)
Technical_details - LEGEND 710 1TB, SSD The ADATA LEGEND 710 SSD uses the PCIe 3.0 x4 interface with NVMe 1.4 specification to offer high performance for creative expression. With read/write speeds of up to 2,400/1,800 MB/s, the LEGEND 710 is significantly faster than SATA SSDs. The LEGEND 710 is also equipped with SLC caching and HMB (Host Memory Buffer) for uninterrupted productivity. The LEGEND 710's understated yet elegant heatsink design features a royal blue color scheme with gold-tone trim. The heatsink reduces temperatures by up to 15% for optimal performance and stability. Type: SSD Colour: blue/gold EAN: 4711085937841 Manufacturer No.: ALEG-710-1TCS Series: LEGEND 710 Design: plug-in card Capacity: 1TB Interface: 1x M.2 (M.2 module key: M) Internal interface: PCIe 3.0 Data transfer rate: Read | 2,400MB/s Data transfer rate: Write | 1,800MB/s IOPS: Read | 180,000 IOPS: Write | 150,000 MTBF: 1,500,000 hours TBW: 260TB Feature: Heatsink, SLC Caching, HMB, LDPC ECC, AES 256-bit Encryption Dimensions: Width: 22mm x Height: 3.13mm x Depth/Length: 80mm Weight: 9 grams
Unit Box Height - 0.105
Unit Box Length - 0.13
Unit Box Width - 0.02
Unit Brutto Volume - 0.000273 cubm
Unit Gross Weight - 0.032 kg
Unit Net Weight - 0.009 kg
Vendor Homepage - www.adata.com/us/consumer/solid-state-drives-LEGEND-710
vendpn - ALEG-710-1TCS
Warranty - 36L months
Warranty - 60
warrantyLength - 36
warrantyType - G
Weight - 0,03
Weight - 6.2 g
weight - 30
Weight & dimensions - Depth - 80 mm
Weight & dimensions - Height - 3.13 mm
Weight & dimensions - Weight - 9 g
Weight & dimensions - Width - 22 mm
Width - 22 mm
Write speed - 1800 MBytes/sec
Writing speed - 1800 MB/s
