TeamGroup MP44, 2TB, M.2 Gen4 x4
- Delivery to Smartpost parcel locker 6.99 €: {delivery_2_txt_full}
- Courier delivery 11.99 €: 10.12.2024
- Capacity: 2 TB
- Type: NVMe
- Read speed (sequential): 7400 MB/s
- Write speed (sequential): 6400 MB/s
- Form factor: M.2 80mm (2280)
- Interface: PCIe 4.0 x4
This TeamGroup brand SSD has a 2 TB capacity and a M.2 80mm (2280) format.
This disc uses the latest generation compact M.2 port.
This is an NVME type SSD drive. It uses the PCI-e protocol, which allows data to be transmitted over multiple lines at the same time. This type of drive is ideal for processing large files, gaming, video editing, and other resource-intensive tasks.
This SSD disk read speed (Sequential read speed) is 7400 MB/s. Keep in mind that "fast" disks without a proper cooling solution may not reach the speeds indicated by the manufacturer.
6400 MB/s - this SSD drive is capable of achieving such data writing speed. The speed parameters promised by the manufacturer may not be reached if the "fast" disk is not provided with an appropriate cooling system.
The format of this SSD drive (physical size of the drive) is M.2 80mm (2280).
This SSD disk has a PCIe 4.0 x4 interface. Keep in mind that if you insert a disk with a newer interface (for example, with PCIe 4.0 or 5.0) into an older interface slot (for example, PCIe 3.0), the disk speed will decrease because the disk will not have sufficient data transfer speed (Bandwidth).
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Category_2 - Internal SSD - M.2
EAN_code - 4711430800103
Manufacturer - Team Group
Manufacturer_code - TM8FPW002T0C101
Name - Team Group MP44 2TB, SSD (PCIe 4.0 x4, NVMe, M.2 2280)
Technical_details - TEAMGROUP's MP44 M.2 PCIe 4.0 SSD uses the PCIe Gen4x4 interface. It offers read/write speeds of 7,400/7,000 MB/s and a storage capacity of 2 TB. It is equipped with a 1mm thick graphene label for heat dissipation, which is also compatible with the integrated M.2 heatsink to achieve better heat dissipation performance. Item No.: 1919313 Type SSD EAN 4711430800103 Manufacturer no. TM8FPW002T0C101 MP44 series Plug-in card design Capacity 2TB Interface 1x M.2 Read data transfer rate 7,400 MB/s Write 660,000 IOPS Read 650,000 MTBF 1,600,000 hours TBW 2,500TB Dimensions Width: 22mm x Height: 3.7mm x Depth/Length: 80mm Weight 7 grams
Weight - 0,03