Dahua C900N, 1TB, M.2 Gen3 x4
- Delivery to Smartpost parcel locker 6.99 €: {delivery_2_txt_full}
- Courier delivery 11.99 €: on Wednesday, 27.11.2024
- Capacity: 1 TB
- Type: NVMe
- Read speed (sequential): 2000 MB/s
- Write speed (sequential): 1600 MB/s
- Form factor: M.2 80mm (2280)
- Interface: PCIe 3.0 x4
We offer to purchase a Dahua M.2 80mm (2280) format SSD drive with a 1 TB capacity.
This SSD drive has a compact and modern M.2 connector.
This is an NVME type SSD drive. It uses the PCI-e protocol, which allows data to be transmitted over multiple lines at the same time. This type of drive is ideal for processing large files, gaming, video editing, and other resource-intensive tasks.
2000 MB/s – this is the data reading speed that this SSD disk is capable of reaching. However, we must remember one crucial nuance - "fast" disks may not show the performance promised by the manufacturer if adequate cooling is not provided.
The write speed (Sequential write speed) of this SSD is 1600 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.
This is an SSD disk in the M.2 80mm (2280) format.
The SSD drive has a PCIe 3.0 x4 interface. If it is inserted into an older interface slot, the potential speed of the drive will not be fully utilized, as the older interface will not provide sufficient data transfer bandwidth.
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
BrandPartCode - DHI-SSD-C900N1TB
Category - Internal Solid State Drives
Category Code - SSU
Description - NVMe M.2 PCIe Gen3x4 Solid State Drive > Supports PCIe3.0x4 and NVMe 1.3 protocol. > Supports LDPC ECC to enhance data reliability. > View information through S.M.A.R.T. > Adopts high-quality 3D NAND wafer level chip and with 4K LDPC technology, the program-erase cycle is effectively improved to extend service time. > Supports TRIM to improve read/write performance and speed. > Low power consumption management.
Dimensions - 80.00 × 22.00 × 2.25 mm
Features - Component for - PC
Features - ECC - Yes
Features - Hardware encryption - No
Features - Interface - PCI Express 3.0
Features - Mean time between failures (MTBF) - 1500000 h
Features - Memory type - 3D TLC
Features - NVMe - Yes
Features - NVMe version - 1.3
Features - S.M.A.R.T. support - Yes
Features - Sequential read speed (ATTO) - 2000 MB/s
Features - Sequential read speed (CDM) - 230000 MB/s
Features - Sequential write speed (ATTO) - 1600 MB/s
Features - Sequential write speed (CDM) - 230000 MB/s
Features - SSD capacity - 1 TB
Features - SSD form factor - M.2
Features - TBW rating - 512
Features - TRIM support - Yes
Form Factor - M.2
Full Description Line - 1TB|Form Factor M.2|PCIe Gen3|NVMe|Technology 3D NAND|Write speed 1600 MBytes/sec|Read speed 2000 MBytes/sec|TBW 512 TB|MTBF 1500000 hours
Logistics data - Country of origin - China
LongDesc - System OverviewThe C900 series NVMe SSD adopts high-quality 3D NAND particles,high-performance controller and sophisticated firmware solution. Thecontinuous read speed is up to 2000 MB/s, and the continuous writespeed is up to 1600 MB/s. Compared with traditional mechanical harddisks with SATA ports, it can effectively improve computer storage andtransmission performance by more than 10 times. SceneDesigned for tech-savvy high-end users, gamers and professionals,Dahua C900 series NVMe M.2 SSD is suitable for use in environmentswith heavy workloads, such as with video creating and editing.
LongProductName - 1TB, M.2 2280, PCIe Gen 3.0 × 4, 80x22x2.25 mm
LongSummaryDescription - Dahua Technology DHI-SSD-C900N1TB. SSD capacity: 1 TB, SSD form factor: M.2, Component for: PC
Model - DHI-SSD-C900N1TB
MTBF - 1.5e+006 hours
NAND flash technology - 3D NAND
NVMe - Yes
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating relative humidity (H-H) - 5 - 95%
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 0.5 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features - Compliance certificates - CE, Federal Communications Commission (FCC), WEEE
Other features - Warranty period - 3 year(s)
Packaging data - Package depth - 105.5 mm
Packaging data - Package height - 15.5 mm
Packaging data - Package width - 140.5 mm
PCIe Gen3 Interface - Yes
Power - Power consumption (idle) - 1.188 W
Power - Power consumption (max) - 3.696 W
ProductName - DHI-SSD-C900N1TB
Read speed - 2000 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 15 cm
Shipping Box Height Shipping/Package Box Dimensions - 2 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.05 kg
Shipping Box Width Shipping/Package Box Dimensions - 10.5 cm
ShortSummaryDescription - Dahua Technology DHI-SSD-C900N1TB, 1 TB, M.2
SSD Capacity - 1TB
Sustainability - Sustainability compliance - Yes
TBW - 512 TB
Title - Dahua Technology DHI-SSD-C900N1TB internal solid state drive 1 TB M.2 PCI Express 3.0 NVMe 3D TLC
Unit Box Height - 0.02
Unit Box Length - 0.15
Unit Box Width - 0.105
Unit Brutto Volume - 0.000315 cubm
Unit Gross Weight - 0.05 kg
Unit Net Weight - 0.008 kg
URL - https://www.dahuasecurity.com/products/All-Products/Dahua-Memory/Internal-SSD/C900/SSD-C900N1TB
Vendor Homepage - www.dahuasecurity.com/ceen/products/All-Products/Dahua-Memory/Internal-SSD/C900/SSD-C900N1TB
Warranty - 36 months
WarrantyInfo -
Weight & dimensions - Depth - 22 mm
Weight & dimensions - Height - 2.25 mm
Weight & dimensions - Weight - 8 g
Weight & dimensions - Width - 80 mm
Write speed - 1600 MBytes/sec