Corsair MP600 Elite, 1TB, M.2 Gen4 x4, with Heatsink
- Delivery to Smartpost parcel locker 6.99 €: {delivery_2_txt_full}
- Courier delivery 11.99 €: 10.12.2024
- Capacity: 1 TB
- Type: NVMe
- Read speed (sequential): 7000 MB/s
- Write speed (sequential): 6200 MB/s
- Form factor: M.2 80mm (2280)
- Interface: PCIe 4.0 x4
This Corsair brand SSD has a 1 TB capacity and a M.2 80mm (2280) format.
This SSD drive has a compact and modern M.2 connector.
This is a fast-acting NVME SSD drive, based on PCIe technology. It allows data to be transmitted in parallel over multiple channels, ensuring excellent performance. This type of drive is perfectly suited for activities such as processing large files, gaming, and video editing, where maximum data transmission speed is required.
The read speed for this SSD drive reaches 7000 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.
The writing speed for this SSD disk reaches 6200 MB/s. Without a suitable cooling mechanism, "fast" disks may not be able to achieve the performance indicators promised by the manufacturer.
To ensure memory chips maintain a low temperature and assure constant performance over long periods of use, the disk equipment is equipped with a cooler or a radiator. However, even if you purchase a "fast" SSD without a built-in radiator, it's not critical - almost all motherboards (99%) already have an integrated M.2 slot cooler.
This SSD drive has an M.2 80mm (2280) format.
The SSD drive has a PCIe 4.0 x4 interface. If it is inserted into an older interface slot, the potential speed of the drive will not be fully utilized, as the older interface will not provide sufficient data transfer bandwidth.
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
code - CSSD-F1000GBMP600ECS
Code - CSSD-F1000GBMP600ECS
Design > SSD form factor - M.2 2280
EAN - 840006677598
ean - 0840006677598
EAN_code - 0840006677598
Link - https://www.corsair.com/uk/en/p/data-storage/cssd-f1000gbmp600ecs/mp600-elite-1tb-pcie-gen4-x4-nvme-1-4-m-2-ssd-for-ps5-cssd-f1000gbmp600ecs
Manufacturer - Corsair
Manufacturer_code - CSSD-F1000GBMP600ECS
name - Corsair MP600 Elite, NVMe SSD, PCIe 4.0 M.2 Typ 2280 - 1 TB
Name - Corsair SSD 1TB 7.0/6.5 MP600 ELITE PS5 Gen4 PCIe M.2 COR (white)
Name - Corsair | SSD | MP600 ELITE | 1000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe NVMe Gen 4.0 x 4 | Read speed 6200 MB/s | Write speed 7000 MB/s
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 22.00 mm
Package features > Gross height (mm) - 80.00 mm
Package features > Gross width (mm) - 19.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 9434 pc(s)
Package features > Paper/Pasteboard - 30.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.04 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Performance > Read speed - 6200 MB/s
Performance > Solid-state drive capacity - 1000 GB
Performance > Solid-state drive interface - PCIe NVMe Gen 4.0 x 4
Performance > Write speed - 7000 MB/s
Producer product family - SSD
Producer product name - MP600 ELITE
Technical details > Gross weight - 0.11 kg
Technical details > Net weight - 0.07 kg
Technical details > Producer - Corsair
Warranty - 36
Warranty - 36 month(s)
Weight - 0,15