ID: 967748
Tuotekoodi: SEDC600M/1920G
Varastossa 22 yksiköt
Takuu: 3 vuotta
Kingston DC600M, 1.92TB
Kuva voi poiketa todellisesta tuotteesta, ja tuotteessa voi olla lisävarusteita ja osia, joita ei toimiteta varsinaisen tuotteen mukana.
Toimitusvaihtoehdot
- Toimitus Smartpost-pakettiautomaattiin 6,99 €: 19.11.2024
- Kuriiritoimitus 11,99 €: 19.11.2024
Tärkeimmät tuoteparametrit Kaikki parametrit
- Kapasiteetti: 1.92TB
- Tyyppi: SATA
- Lukunopeus (peräkkäinen): 560 MB/s
- Kirjoitusnopeus (peräkkäinen): 530 MB/s
- Muotoilutekijä: 2.5"
- Liitäntä: SATA III (6Gb/s)
Kuvaus
Tarjoamme ostaa Kingston 2.5" formaatin SSD-levy, jossa on 1.92TB suuri kapasiteetti.
Lisäetuna SSD-levyt ovat täysin äänettömiä, sillä niissä ei ole mekaanisia liikkuvia osia, toisin kuin tavallisissa kiintolevyissä. Toinen ominaisuus on erittäin alhainen virrankulutus, jota kannettavien tietokoneiden omistajat varmasti arvostavat, sillä tämä parametri pidentää merkittävästi akun käyttöikää.
Lisäetuna SSD-levyt ovat täysin äänettömiä, sillä niissä ei ole mekaanisia liikkuvia osia, toisin kuin tavallisissa kiintolevyissä. Toinen ominaisuus on erittäin alhainen virrankulutus, jota kannettavien tietokoneiden omistajat varmasti arvostavat, sillä tämä parametri pidentää merkittävästi akun käyttöikää.
Perustiedot
Kapasiteetti
1.92TB
Kiintolevyn kapasiteetti gigatavuina ilmaisee, kuinka paljon tietoa kiintolevylle voidaan tallentaa. Kiintolevyn kapasiteetti on kiinteä, eikä sitä voi lisätä kiintolevyn ostamisen jälkeen. Siksi kiintolevyä ostaessasi sinun on tarkistettava, että se vastaa nykyisiä tilavuusvaatimuksiasi ja tarjoaa varauksen tulevia tarpeita varten.
Tyyppi
: SATA
Lukunopeus (peräkkäinen)
560 MB/s
Jaksollinen lukunopeus eli keskimääräinen tiedonlukunopeus on SSD-levyn nopean toiminnan tärkein kriteeri. SSD-levyltä luetaan tietoja paljon useammin kuin sinne kirjoitetaan, koska käyttöjärjestelmä tallentaa käsitellyt tiedot useimmiten RAM-muistiin.
Jos haluat, että ostamasi SSD-levyn lukunopeus ylittää huomattavasti klassisen kiintolevyn nopeuden, sinun kannattaa valita SSD-levy, jonka lukunopeus on vähintään 200 MB/s. Suorituskyvyn lisäys saavutetaan tiedonhaun (SeekTime) ansiosta, joka on SSD-levyillä paljon korkeammalla tasolla kuin kiintolevyillä.
Kirjoitusnopeus (peräkkäinen)
530 MB/s
Kirjoitusnopeus on lähes yhtä tärkeä kuin lukunopeus. Myös tämä parametri määrittää SSD-levyn suorituskyvyn, mutta koska kirjoittaminen levylle ei tapahdu yhtä usein kuin tietojen lukeminen ja keskivertokäyttäjän on subjektiivisesti vaikea erottaa mitään yli 100 MB/s nopeutta suuremmista indekseistä, lukuun ottamatta tapauksia, joissa SSD-levyä käytetään palvelimessa, äänen/videoiden tallentamiseen jne.
Toiminnallisuus
Patterit
: Ei ole
Valaistus
: Ei ole
Satamat ja laitteet
Muotoilutekijä
2.5"
SSD-tekniikan tarjoaman pienen koon ansiosta levyjen vakiokoko on 2,5 tuumaa, ja se sopii keskivertokannettavaan tietokoneeseen. Pöytäkoneeseen on mahdollista asentaa 2,5 tuuman levy, jos käytetään siirtymää 2,5" -> 3,5", ja tämän siirtymän voi ostaa edullisesti osoitteesta TopPC.fi kohdasta "Adapteri". 2,5" + 3,5" -muotoisissa levyissä on tämä siirtymä mukana.
1,8" levyt on tarkoitettu ultrakompaktin luokan kannettaviin tietokoneisiin.
PCI-Express SSD -levyt on tarkoitettu pöytätietokoneisiin, joissa on käytettävissä vapaa PCI-Express-liitin. Tätä tekniikkaa käytetään useimmissa tapauksissa varmistamaan suorituskyky, joka ylittää muiden liitäntätyyppien mahdollisuudet.
Liitäntä
: SATA III (6Gb/s)
Liitäntä
SATA
SATAII- ja SATAIII-liitännällä varustetut SSD-asemat ovat yhteensopivia emolevyn molempien liitäntätyyppien kanssa.
On kuitenkin otettavahuomioon, että emolevyn SATAII-liitäntä voi tarjota enintään noin 300 MB/s siirtokapasiteetin, mikä voi vähentää niiden SSD-asemien todellisen siirtokapasiteetin, joiden luku- ja/tai kirjoitusnopeus ylittää tämän tason, SATAII-liitännän kapasiteettirajoihin.
Tilanne on samanlainen PCI-Express- ja SATAIII-liitäntäpaikkojen kanssa. Vaikka SATAIII-standardi voi tarjota jopa 600 MB/s tiedonsiirtokapasiteetin, on SSD-asemia, joiden nopeus ylittää tämän rajan, jolloin valmistaja valitsee PCI-Express-liitäntäpaikan, jonka siirtokapasiteetti on suurempi. PCI-Express-levyjä ei voi liittää kannettavaan tietokoneeseen.
Tekniset tiedot
Muistin tyyppi
: TLC (Triple-Level Cell)
Satunnaisen lukemisen IOPS
: Ei ilmoitettu
Satunnaisen kirjoituksen IOPS
: Ei ilmoitettu
Kestävyys (TBW)
: 3504 TB
Yksityiskohtaisempi erittely
ARTIKEL1 - 1920G DC600M 2.5IN SATA SSD
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Brand - Kingston Technology
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category - Root/Electronics/PC parts/Hard drives
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD
Code - SEDC600M/1920G
Color - Not applicable
Depth - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
Description - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.
Design > SSD form factor - 2.5"
dimensionalWeight - 32
dimension depth - 20 mm
dimension height - 190 mm
Dimensions - 69.9mm x 100mm x 7mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
EAN - 740617334890
ean - 740617334890
EANCode - 0740617334890
Eans - 740617334890
EAN_code - 0740617334890
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Form Factor - 2,5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series DC600M|1.92TB|SATA|Technology 3D TLC|Write speed 530 MBytes/sec|Read speed 560 MBytes/sec|Form Factor 2,5"|MTBF 2000000 hours|Drive thickness 7mm
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334890
GTIN - 740617334890
guarantee - 60
guarantee_type - normal
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
HERSTELLER - KINGSTON
HSTNUMMER - SEDC600M/1920G
Link - https://www.kingston.com/en/memory/search?partid=SEDC600M/1920G
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.9 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.Capacities available from 480GB–7680GB* to meet your data storage requirements.Designed for data center environmentsOptimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meet service-level agreements (SLAs).Capacities of up to 7680GBUpgrade and manage storage with capacities of up to 7680GB** .
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/1920G
Model - DC600M
Model - SEDC600M/1920G
MTBF - 2e+006 hours
Name - Kingston DC600M 1920 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 1920 GB | SSD form factor 2.5" | SSD interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
Name - Kingston SSD DC600M 1920GB
name - SSD drive DC600M 1920GB
NAND flash technology - 3D TLC
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7042 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Packaging data - Package depth - 9.1 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 1920 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (max) - 3.6 W
Power - Power consumption (write) - 1.6 W
producer - Kingston
Producer - Kingston
producerCode - SEDC600M/1920G
ProducerCode - SEDC600M/1920G
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 78 K
Reading speed - 560 MB/s
Read speed - 560 MBytes/sec
SATA Interface - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 18.5 cm
Shipping Box Height Shipping/Package Box Dimensions - 1 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.095 kg
Shipping Box Width Shipping/Package Box Dimensions - 13 cm
ShortDescription - 2.5'' | SSD | 1920GB | 560/530MB/s | Serial ATA 3 | 7mm
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 130
sizeZ - 7
SSD Capacity - 1.92TB
SSD series - DC600M
Stck_Kart - 0
Stck_Pal - 0
Storno - Y
TBW - 3504 TB
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.01
Unit Box Length - 0.185
Unit Box Width - 0.13
Unit Brutto Volume - 0.0002405 cubm
Unit Gross Weight - 0.095 kg
Unit Net Weight - 0.092 kg
URL - https://www.kingston.com/
Vendor Homepage - www.kingston.com/en/ssd/dc600m-data-center-solid-state-drive
vendpn - SEDC600M/1920G
Warranty - 36
Warranty - 36 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support *******
warrantyLength - 60
warrantyType - G
Weight - 0,09
Weight - 69 g
weight - 85
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 70 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.9 mm
Width - 69.9 mm
Write speed - 530 MBytes/sec
Writing speed - 530 MB/s
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Brand - Kingston Technology
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category - Root/Electronics/PC parts/Hard drives
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD
Code - SEDC600M/1920G
Color - Not applicable
Depth - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
Description - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.
Design > SSD form factor - 2.5"
dimensionalWeight - 32
dimension depth - 20 mm
dimension height - 190 mm
Dimensions - 69.9mm x 100mm x 7mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
EAN - 740617334890
ean - 740617334890
EANCode - 0740617334890
Eans - 740617334890
EAN_code - 0740617334890
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Form Factor - 2,5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series DC600M|1.92TB|SATA|Technology 3D TLC|Write speed 530 MBytes/sec|Read speed 560 MBytes/sec|Form Factor 2,5"|MTBF 2000000 hours|Drive thickness 7mm
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334890
GTIN - 740617334890
guarantee - 60
guarantee_type - normal
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
HERSTELLER - KINGSTON
HSTNUMMER - SEDC600M/1920G
Link - https://www.kingston.com/en/memory/search?partid=SEDC600M/1920G
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.9 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.Capacities available from 480GB–7680GB* to meet your data storage requirements.Designed for data center environmentsOptimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meet service-level agreements (SLAs).Capacities of up to 7680GBUpgrade and manage storage with capacities of up to 7680GB** .
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/1920G
Model - DC600M
Model - SEDC600M/1920G
MTBF - 2e+006 hours
Name - Kingston DC600M 1920 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 1920 GB | SSD form factor 2.5" | SSD interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
Name - Kingston SSD DC600M 1920GB
name - SSD drive DC600M 1920GB
NAND flash technology - 3D TLC
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7042 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Packaging data - Package depth - 9.1 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 1920 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (max) - 3.6 W
Power - Power consumption (write) - 1.6 W
producer - Kingston
Producer - Kingston
producerCode - SEDC600M/1920G
ProducerCode - SEDC600M/1920G
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 78 K
Reading speed - 560 MB/s
Read speed - 560 MBytes/sec
SATA Interface - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 18.5 cm
Shipping Box Height Shipping/Package Box Dimensions - 1 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.095 kg
Shipping Box Width Shipping/Package Box Dimensions - 13 cm
ShortDescription - 2.5'' | SSD | 1920GB | 560/530MB/s | Serial ATA 3 | 7mm
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 130
sizeZ - 7
SSD Capacity - 1.92TB
SSD series - DC600M
Stck_Kart - 0
Stck_Pal - 0
Storno - Y
TBW - 3504 TB
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.01
Unit Box Length - 0.185
Unit Box Width - 0.13
Unit Brutto Volume - 0.0002405 cubm
Unit Gross Weight - 0.095 kg
Unit Net Weight - 0.092 kg
URL - https://www.kingston.com/
Vendor Homepage - www.kingston.com/en/ssd/dc600m-data-center-solid-state-drive
vendpn - SEDC600M/1920G
Warranty - 36
Warranty - 36 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support *******
warrantyLength - 60
warrantyType - G
Weight - 0,09
Weight - 69 g
weight - 85
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 70 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.9 mm
Width - 69.9 mm
Write speed - 530 MBytes/sec
Writing speed - 530 MB/s
