ID: 967752
Tuotekoodi: SEDC600M/3840G
Varastossa 9 yksiköt
Takuu: 3 vuotta
Kingston DC600M 3.84TB
Kuva voi poiketa todellisesta tuotteesta, ja tuotteessa voi olla lisävarusteita ja osia, joita ei toimiteta varsinaisen tuotteen mukana.
Tärkeimmät tuoteparametrit Kaikki parametrit
- Kapasiteetti: 3.84TB
- Tyyppi: SATA
- Lukunopeus (peräkkäinen): 560 MB/s
- Kirjoitusnopeus (peräkkäinen): 530 MB/s
- Muotoilutekijä: 2.5"
- Liitäntä: SATA III (6Gb/s)
Kuvaus
Tarjoamme ostaa Kingston 2.5" formaatin SSD-levy, jossa on 3.84TB suuri kapasiteetti.
Lisäetuna SSD-levyt ovat täysin äänettömiä, sillä niissä ei ole mekaanisia liikkuvia osia, toisin kuin tavallisissa kiintolevyissä. Toinen ominaisuus on erittäin alhainen virrankulutus, jota kannettavien tietokoneiden omistajat varmasti arvostavat, sillä tämä parametri pidentää merkittävästi akun käyttöikää.
Lisäetuna SSD-levyt ovat täysin äänettömiä, sillä niissä ei ole mekaanisia liikkuvia osia, toisin kuin tavallisissa kiintolevyissä. Toinen ominaisuus on erittäin alhainen virrankulutus, jota kannettavien tietokoneiden omistajat varmasti arvostavat, sillä tämä parametri pidentää merkittävästi akun käyttöikää.
Perustiedot
Kapasiteetti
3.84TB
Kiintolevyn kapasiteetti gigatavuina ilmaisee, kuinka paljon tietoa kiintolevylle voidaan tallentaa. Kiintolevyn kapasiteetti on kiinteä, eikä sitä voi lisätä kiintolevyn ostamisen jälkeen. Siksi kiintolevyä ostaessasi sinun on tarkistettava, että se vastaa nykyisiä tilavuusvaatimuksiasi ja tarjoaa varauksen tulevia tarpeita varten.
Tyyppi
: SATA
Lukunopeus (peräkkäinen)
560 MB/s
Jaksollinen lukunopeus eli keskimääräinen tiedonlukunopeus on SSD-levyn nopean toiminnan tärkein kriteeri. SSD-levyltä luetaan tietoja paljon useammin kuin sinne kirjoitetaan, koska käyttöjärjestelmä tallentaa käsitellyt tiedot useimmiten RAM-muistiin.
Jos haluat, että ostamasi SSD-levyn lukunopeus ylittää huomattavasti klassisen kiintolevyn nopeuden, sinun kannattaa valita SSD-levy, jonka lukunopeus on vähintään 200 MB/s. Suorituskyvyn lisäys saavutetaan tiedonhaun (SeekTime) ansiosta, joka on SSD-levyillä paljon korkeammalla tasolla kuin kiintolevyillä.
Kirjoitusnopeus (peräkkäinen)
530 MB/s
Kirjoitusnopeus on lähes yhtä tärkeä kuin lukunopeus. Myös tämä parametri määrittää SSD-levyn suorituskyvyn, mutta koska kirjoittaminen levylle ei tapahdu yhtä usein kuin tietojen lukeminen ja keskivertokäyttäjän on subjektiivisesti vaikea erottaa mitään yli 100 MB/s nopeutta suuremmista indekseistä, lukuun ottamatta tapauksia, joissa SSD-levyä käytetään palvelimessa, äänen/videoiden tallentamiseen jne.
Toiminnallisuus
Patterit
: Ei ole
Valaistus
: Ei ole
Satamat ja laitteet
Muotoilutekijä
2.5"
SSD-tekniikan tarjoaman pienen koon ansiosta levyjen vakiokoko on 2,5 tuumaa, ja se sopii keskivertokannettavaan tietokoneeseen. Pöytäkoneeseen on mahdollista asentaa 2,5 tuuman levy, jos käytetään siirtymää 2,5" -> 3,5", ja tämän siirtymän voi ostaa edullisesti osoitteesta TopPC.fi kohdasta "Adapteri". 2,5" + 3,5" -muotoisissa levyissä on tämä siirtymä mukana.
1,8" levyt on tarkoitettu ultrakompaktin luokan kannettaviin tietokoneisiin.
PCI-Express SSD -levyt on tarkoitettu pöytätietokoneisiin, joissa on käytettävissä vapaa PCI-Express-liitin. Tätä tekniikkaa käytetään useimmissa tapauksissa varmistamaan suorituskyky, joka ylittää muiden liitäntätyyppien mahdollisuudet.
Liitäntä
: SATA III (6Gb/s)
Liitäntä
SATA
SATAII- ja SATAIII-liitännällä varustetut SSD-asemat ovat yhteensopivia emolevyn molempien liitäntätyyppien kanssa.
On kuitenkin otettavahuomioon, että emolevyn SATAII-liitäntä voi tarjota enintään noin 300 MB/s siirtokapasiteetin, mikä voi vähentää niiden SSD-asemien todellisen siirtokapasiteetin, joiden luku- ja/tai kirjoitusnopeus ylittää tämän tason, SATAII-liitännän kapasiteettirajoihin.
Tilanne on samanlainen PCI-Express- ja SATAIII-liitäntäpaikkojen kanssa. Vaikka SATAIII-standardi voi tarjota jopa 600 MB/s tiedonsiirtokapasiteetin, on SSD-asemia, joiden nopeus ylittää tämän rajan, jolloin valmistaja valitsee PCI-Express-liitäntäpaikan, jonka siirtokapasiteetti on suurempi. PCI-Express-levyjä ei voi liittää kannettavaan tietokoneeseen.
Tekniset tiedot
Muistin tyyppi
: TLC (Triple-Level Cell)
Satunnaisen lukemisen IOPS
: Ei ilmoitettu
Satunnaisen kirjoituksen IOPS
: Ei ilmoitettu
Kestävyys (TBW)
: 7008 TB
Yksityiskohtaisempi erittely
ARTIKEL1 - 3840G DC600M 2.5IN SATA SSD
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Brand - Kingston Technology
BrandPartCode - SEDC600M/3840G
Breite - 0
Category - Internal Solid State Drives
Category - Root/Electronics/PC parts/Hard drives
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
category_en - Computers & Components > Computer components > Hard Drives > SSD
category_lv - Datortehnika > Datoru komponentes > Cietie diski > SSD
category_ru - Datortehnika > Datoru komponentes > Cietie diski > SSD
Code - SEDC600M/3840G
Color - Not applicable
Depth - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
description_en - Kingston Technology DC600M
SSD capacity: 3.84 TB
Teurobody disk form factor: 2.5"
Read speed: 560 MB/s
Write speed: 530 MB/s
Data transfer rate: 6 Gbit/s
Accessories for: Server/worker. station
description_lv - Kingston Technology DC600M
SSD ietilpība: 3,84 TB
Teurobody diska formas koeficients: 2,5 collas
Lasīšanas ātrums: 560 MB/s
Rakstīšanas ātrums: 530 MB/s
Datu pārraides ātrums: 6 Gbit/s
Piederumi: Serverim/darbiniekam. stacija
description_ru - Kingston Technology DC600M Объем SSD: 3,84 TB
форм-фактор тевродотельного диска: 2.5"
Скорость считывания: 560 MB/s
Скорость записи: 530 MB/s
Скорость передачи данных: 6 Gbit/s
Комплектующие для: Сервер/раб. станция
Design > SSD form factor - 2.5"
dimensionalWeight - 70
dimension depth - 20 mm
dimension height - 190 mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
EAN - 740617334975
ean - 740617334975
EANCode - 0740617334975
Eans - 740617334975
EAN_code - 0740617334975
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 59000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 3.84 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 7008
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Form factor (width) - 2,5'' (SFF)
Gewicht - 0
gross_weight - 0.2 kg
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334975
GTIN - 740617334975
guarantee - 60
guarantee_type - normal
HDD capacity - 3.84 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
HERSTELLER - KINGSTON
Hoehe - 0
HSTNUMMER - SEDC600M/3840G
Laenge - 0
Link - https://www.kingston.com/en/ssd/dc600m-data-center-solid-state-drive?capacity=3.84tb
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 1.01 kg
Logistics data - Master (outer) case height - 69.9 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.Capacities available from 480GB–7680GB* to meet your data storage requirements.Designed for data center environmentsOptimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meet service-level agreements (SLAs).Capacities of up to 7680GBUpgrade and manage storage with capacities of up to 7680GB** .
LongProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 3.84 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/3840G
Model - DC600M
Model - SEDC600M/3840G
Name - Kingston DC600M 3840 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 3840 GB | SSD form factor 2.5" | Solid-state drive interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
Name - Kingston SSD DC600M 3840GB
name - SSD drive DC600M 3840GB
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 6993 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Packaging data - Package depth - 9.1 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 93.2 g
Packaging data - Package width - 129.5 mm
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 3840 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (max) - 1.45 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
producer - Kingston
Producer - Kingston
producerCode - SEDC600M/3840G
ProducerCode - SEDC600M/3840G
ProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 59 K
Reading speed - 560 MB/s
ShortDescription - 2.5'' | SSD | 3840GB | 560/530MB/s | Serial ATA 3 | 7mm
ShortSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 3.84 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 15
sizeZ - 130
Stck_Kart - 0
Stck_Pal - 0
Storno - Y
TBW - 7008 TB
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Technical_details - The Kingston DC600M SSD is a 4th generation SATA 3.0, 6Gbps data center SSD with 3D TLC NAND intended for mixed workloads. The DC600M is suitable for use in high-volume rackmount servers and features hardware-based on-board PLP. Using power failure capacitors, the DC600M protects data from unexpected power outages to reduce the risk of data loss and ensure that the drive is successfully reinitialized the next time the system is turned on. The DC600M is specifically designed to provide system integrators, hyperscale data centers and cloud service providers with consistent latency and IOPS. Item no.: 1916730 Type SSD EAN 0740617334975 Manufacturer no. SEDC600M/3840G DC600M series Design 2.5 inches Capacity 3.84TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Data transfer rate reading 560 MB/s Write 59,000 Chip type TLC Power consumption resting 1.3 W IOPS Read 94,000 MTBF 2,000,000 hours TBW 7,008 TB Feature power failure protection, namespace management support (up to 64 namespaces) Dimensions Width: 69.9mm x Height: 7mm x Depth/Length: 100mm Weight 92 grams
Title - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
title_en - Kingston DC600M SSD Disk 3840GB
title_lv - Kingston DC600M SSD Disks 3840GB
title_ru - Kingston DC600M SSD Диск 3840GB
URL - https://www.kingston.com/
vendpn - SEDC600M/3840G
Warranty - 36
Warranty - 36 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support *******
warrantyLength - 60
warrantyType - G
Weight - 0,09
weight - 0.15 kg
Weight - 71 g
weight - 90
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 70 mm
Weight & dimensions - Weight - 71 g
Weight & dimensions - Width - 69.9 mm
Width - 69.9 mm
Writing speed - 530 MB/s
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Brand - Kingston Technology
BrandPartCode - SEDC600M/3840G
Breite - 0
Category - Internal Solid State Drives
Category - Root/Electronics/PC parts/Hard drives
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
category_en - Computers & Components > Computer components > Hard Drives > SSD
category_lv - Datortehnika > Datoru komponentes > Cietie diski > SSD
category_ru - Datortehnika > Datoru komponentes > Cietie diski > SSD
Code - SEDC600M/3840G
Color - Not applicable
Depth - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
description_en - Kingston Technology DC600M
SSD capacity: 3.84 TB
Teurobody disk form factor: 2.5"
Read speed: 560 MB/s
Write speed: 530 MB/s
Data transfer rate: 6 Gbit/s
Accessories for: Server/worker. station
description_lv - Kingston Technology DC600M
SSD ietilpība: 3,84 TB
Teurobody diska formas koeficients: 2,5 collas
Lasīšanas ātrums: 560 MB/s
Rakstīšanas ātrums: 530 MB/s
Datu pārraides ātrums: 6 Gbit/s
Piederumi: Serverim/darbiniekam. stacija
description_ru - Kingston Technology DC600M Объем SSD: 3,84 TB
форм-фактор тевродотельного диска: 2.5"
Скорость считывания: 560 MB/s
Скорость записи: 530 MB/s
Скорость передачи данных: 6 Gbit/s
Комплектующие для: Сервер/раб. станция
Design > SSD form factor - 2.5"
dimensionalWeight - 70
dimension depth - 20 mm
dimension height - 190 mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
EAN - 740617334975
ean - 740617334975
EANCode - 0740617334975
Eans - 740617334975
EAN_code - 0740617334975
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 59000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 3.84 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 7008
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Form factor (width) - 2,5'' (SFF)
Gewicht - 0
gross_weight - 0.2 kg
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334975
GTIN - 740617334975
guarantee - 60
guarantee_type - normal
HDD capacity - 3.84 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
HERSTELLER - KINGSTON
Hoehe - 0
HSTNUMMER - SEDC600M/3840G
Laenge - 0
Link - https://www.kingston.com/en/ssd/dc600m-data-center-solid-state-drive?capacity=3.84tb
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 1.01 kg
Logistics data - Master (outer) case height - 69.9 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.Capacities available from 480GB–7680GB* to meet your data storage requirements.Designed for data center environmentsOptimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meet service-level agreements (SLAs).Capacities of up to 7680GBUpgrade and manage storage with capacities of up to 7680GB** .
LongProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 3.84 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/3840G
Model - DC600M
Model - SEDC600M/3840G
Name - Kingston DC600M 3840 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 3840 GB | SSD form factor 2.5" | Solid-state drive interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
Name - Kingston SSD DC600M 3840GB
name - SSD drive DC600M 3840GB
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 6993 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Packaging data - Package depth - 9.1 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 93.2 g
Packaging data - Package width - 129.5 mm
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 3840 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (max) - 1.45 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
producer - Kingston
Producer - Kingston
producerCode - SEDC600M/3840G
ProducerCode - SEDC600M/3840G
ProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 59 K
Reading speed - 560 MB/s
ShortDescription - 2.5'' | SSD | 3840GB | 560/530MB/s | Serial ATA 3 | 7mm
ShortSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 3.84 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 15
sizeZ - 130
Stck_Kart - 0
Stck_Pal - 0
Storno - Y
TBW - 7008 TB
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Technical_details - The Kingston DC600M SSD is a 4th generation SATA 3.0, 6Gbps data center SSD with 3D TLC NAND intended for mixed workloads. The DC600M is suitable for use in high-volume rackmount servers and features hardware-based on-board PLP. Using power failure capacitors, the DC600M protects data from unexpected power outages to reduce the risk of data loss and ensure that the drive is successfully reinitialized the next time the system is turned on. The DC600M is specifically designed to provide system integrators, hyperscale data centers and cloud service providers with consistent latency and IOPS. Item no.: 1916730 Type SSD EAN 0740617334975 Manufacturer no. SEDC600M/3840G DC600M series Design 2.5 inches Capacity 3.84TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Data transfer rate reading 560 MB/s Write 59,000 Chip type TLC Power consumption resting 1.3 W IOPS Read 94,000 MTBF 2,000,000 hours TBW 7,008 TB Feature power failure protection, namespace management support (up to 64 namespaces) Dimensions Width: 69.9mm x Height: 7mm x Depth/Length: 100mm Weight 92 grams
Title - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
title_en - Kingston DC600M SSD Disk 3840GB
title_lv - Kingston DC600M SSD Disks 3840GB
title_ru - Kingston DC600M SSD Диск 3840GB
URL - https://www.kingston.com/
vendpn - SEDC600M/3840G
Warranty - 36
Warranty - 36 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support *******
warrantyLength - 60
warrantyType - G
Weight - 0,09
weight - 0.15 kg
Weight - 71 g
weight - 90
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 70 mm
Weight & dimensions - Weight - 71 g
Weight & dimensions - Width - 69.9 mm
Width - 69.9 mm
Writing speed - 530 MB/s
